InterestPrint® Women's Halter Neck Gather Chest Bikini Swimsuit (Model S53)
Type: 85% Polyester and 15% Spandex, Two Pieces, All Over Printing Production Time: 3-5 business days
-
8.54 Oz. Made from 85% polyester and 15% spandex, smooth and lightly elastic.
-
The top features an elastic band, a self-tie halter neck, and a back metal buckle.
-
Bottom offers side ruffles for excellent tummy coverage.
-
Full-coverage bra with an underwire offers fuller cups and enhanced support.
-
Suitable for many occasions: swimming, beach, bathing, pool, water park, spa, etc.
-
Size: S, M, L, XL, 2XL, 3XL, 4XL, 5XL. Please calculate your size from the measurement chart below.
-
Garment care: hand wash with cold water. Do not use bleach. Do not tumble dry.
-
Please order 2 brand logos if you'd like to add your brand logo for this product.
-
Designer Tip: To ensure the highest quality print,
please note that this product's recommended upload image size in
pixels (W x H):
Pant-front: 2894 x 2842 or Higher / 150 dpi;
Pant-Back: 3072 x 2326 or Higher / 150 dpi;
Upper cup-Left: 1344 x 472 or Higher / 150 dpi;
Lower cup-Left: 1089 x 730 or Higher / 150 dpi;
Upper cup-Right: 1344 x 472 or Higher / 150 dpi;
Lower cup-Right: 1089 x 730 or Higher / 150 dpi;
Front Down: 3047 x 1186 or Higher / 150 dpi;
Back-Left: 1305 x 564 or Higher / 150 dpi;
Back-Right: 1305 x 564 or Higher / 150 dpi;
Back Down: 2553 x 675 or Higher / 150 dpi;
Straps-Left: 501 x 2858 or Higher / 150 dpi;
Straps-Right: 501 x 2858 or Higher / 150 dpi.
-
![]()
CUSTOMIZATION TIPS
We can't guarantee exact placement. There might be slight discrepancies in print placement. Please keep the main elements of your art towards the center of the design area. Anything near the edge runs the risk of being cut off during the cutting and sewing process.
We allow the color accuracy deviation of the finished product and the mockup image to be within 5%. Please Avoid uploading neon, matte, and metallic colors as our printers cannot achieve accurate printing representation on these specialty color profiles.
There may be small differences in the design of clothing products, with a deviation of 2-3 cm measured manually during the production process.
It is impossible to perfectly align patterns or images at the seams perfectly.
Please make sure your design covers the entire print area.